View RP40-2433SGWN_1352303.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

40 watt 2 x 2 single & dual output powerline dc/dc-converter rp40- s_dgw series 4:1 wide input voltage range 40 watts regulated output power 1.6kvdc isolation over current and over voltage protection six-sided shield no derating to 55c standard 2 x2 package and pinning efficiency to 86% features regulated converters selection guide 24v and 48v wide input types derating graph (ambient temperature) part number input output output input (4,5) efficiency (6) capacitive (7) range voltage current current load max. vdc vdc ma ma % f rp40-243.3sgw 9-36 3.3 10000 80/1677 86 25750 rp40-2405sgw 9-36 5 8000 100/1984 88 13600 rp40-2412sgw 9-36 12 3333 100/1984 88 2360 rp40-2415sgw 9-36 15 2666 110/1984 88 1510 rp40-483.3sgw 18-75 3.3 10000 50/838 86 25750 rp40-4805sgw 18-75 5 8000 50/992 88 13600 rp40-4812sgw 18-75 12 3333 70/992 88 2360 rp40-4815sgw 18-75 15 2666 70/992 88 1510 rp40-2412dgw 9-36 12 1667 30/1984 88 1200 rp40-2415dgw 9-36 15 1333 30/1984 88 750 rp40-4812dgw 18-75 12 1667 20/992 88 1200 rp40-4815dgw 18-75 15 1333 20/992 88 750

!
"

#$ % #$ % #$ & $ rp40-4805sgw derating graphs are valid only for the shown part numbers. if you need detailed derating-information about a part-number not shown here please contact our technical customer service at info@recom-development.at * no suffix for ctrl function with positive logic (1=on, 0=off), this is standard * add /n for ctrl function with negative logic (0=on, 1=off) november-2006 www.recom-international.com 280
derating graph (ambient temperature)

!
"

# &' (
) % #*+,% #-*+,% #*+,% #*+, rp40-4805sgw powerline dc/dc-converter rp40-s_dgw series specifications (typical at nominal input and 25c unless otherwise noted) input voltage range 24v nominal input 9-36vdc 48v nominal input 18-75vdc undervoltage protection 24v input dc-dc on = 9vdc, dc-dc off = 8vdc 48v input dc-dc on = 18vdc, dc-dc off = 16vdc input filter pi type input voltage variation dv/dt (complies with ets300 132 part 4.4) 5v/ms max input surge voltage (100 ms max.) 24v input 50vdc 48v input 100vdc input reflected ripple (nominal vin and full load)(see note 3) 20map-p start up time (nominal vin and constant resistor load) 20ms typ. remote on/off (see note 7) (positiv logic) dc-dc on open or 3v < vr < 12v dc-dc off short or 0v < vr < 1.2v (negativ logic) dc-dc on short or 0v < vr < 1.2v dc-dc off open or 3v < vr < 12v remote off input current nominal input 24vin: 10ma 48vin: 5ma output power 40w max. output voltage accuracy (full load and nominal vin) 1% continued on next page november-2006 281 www.recom-international.com
specifications, cont. (typical at nominal input and 25c unless otherwise noted) powerline dc/dc-converter rp40-s_dgw series voltage adjustability (see note 1) 10% load regulation (0% to 100% full load) (see notes 9, 10) single 0.5% dual 1% line regulation (low line, high line at full load) 0.2% cross regulation (see note 11) dual 5% temperature coefficient 0.02%/c max. ripple and noise (20mhz bandwith) single 3.3, 5v 50mvp-p single 12, 15v 75mvp-p dual 12v 120mvp-p dual 15v 150mvp-p transient response (25% load step change) 250s over voltage protection 3.3 vout 3.9v zener diode clamp (only single) 5 vout 6.2v 12 vout / 12 vout 15v / 15v 15 vout / 15 vout 18v / 18v over load protection (% of full load at nominal vin) 150% max. short circuit protection hiccup, automatic recovery efficiency see ?selection guide table isolation voltage 1600vdc min. isolation resistance 1 g ? min. isolation capacitance 1500pf max. operating frequency 300khz typ. operating temperature range -40c to +55c(without derating) +55c to +105c(with derating) maximum case temperature 105c storage temperature range -55c to +125c over temperature protection 115c typ. thermal impedance (see note 8) without heat-sink 9.2c/watt with heat-sink 7.6c/watt thermal shock mil-std-810d vibration 10-55hz, 10g, 30 min. along x, y and z relative humidity 5% to 95% rh case material nickel plated copper base material non-conductive black plastic fr4 potting material epoxy (ul94-v0) conducted emissions (see notes 12, 14) en55022 class a radiated emissions en55022 class a esd en61000-4-2 perf. criteria b radiated immunity en61000-4-3 perf. criteria a fast transient en61000-4-4 perf. criteria b surge en61000-4-5 perf. criteria b conducted immunity en61000-4-6 perf. criteria a weight 60g dimensions 51.3 x 51.3 x 10.2mm mtbf (see note 2) bellcore tr-nwt-00332 1105 x 10 3 hours mil-std-217f 151 x 10 3 hours november-2006 www.recom-international.com 282
notes : powerline dc/dc-converter rp40-s_dgw series 1. for the single output: maximum output deviation is 10% inclusive of remote sense and trim. if remote sense is not being used, the +sense should be connected to its corresponding +output and likewise the -sense should be connected to its corresponding Coutput. 2. bellcore tr-nwt-000332. case l: 50% stress, temperature at 40c (ground fixed and controlled environment). 3. simulated source impedance of 12h. 12h inductor in series with +vin. 4. maximum value at nominal input voltage and full load. 5. typical value at nominal input voltage and full load. 6. test by minimum vin and constant resistive load. 7. the on/off control function. there are positive logic (standard) and negative logic (option). the pin voltage is referenced t o negative input to order negative logic on/off control add the suffix-n (ex: rp40-4805sgw-n). 8. heat sink is optional and p/n: 7g-0026a. 9. the dual output required a minimum loading on the output to maintain specified regulation. operation under no-load condition will not damage these devices, however they may not meet all listed specification. 10. load regulation for dual output : min load to 100% load balanced on all outputs. 11.cross regulation for dual output : asymmetrical load 25% / 100% fl. 12..the rp40-gw series required external filter to meets en55022 class a. 13.output ripple and noise measured with a 0.1f/50v mlcc. 14.see application notes for emi-filtering. package style and pinning (mm) . .- - . . / $
! . 0 . . . .- .- . . . . . .- -0 '
1
) pin pitch tolerance 0.35 mm pin connections pin # single dual 1 +vin +vin 2 -vin -vin 3 ctrl ctrl 4 -sense (note 1) +vout 5 +sense (note 2) com 6 +vout com 7 -vout -vout 8 trim trim 2 2 3 ! 3 external output trimming output can be externally trimmed by using the method shown below. ( ) for dual output trim november-2006 283 www.recom-international.com

▲Up To Search▲

Price & Availability of RP40-2433SGWN

	To Download RP40-2433SGWN Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .